AFLAS Top Page
AGC Chemicals
NewsGroup CompaniesLinksSitemapJapaneseChinese
ProductsApplicationsFormulationSearchFAQContact E-mail
AFLAS® > Products >AFLAS® 100/150 Series
Features of AFLAS®
Basic Properties of AFLAS®
Chemical Resistance of AFLAS®
Cost Advantage of AFLAS®
AFLAS® 100/150 Series
Standard Grade
AFLAS® 200 Series
Balances low-temperature properties and chemical resistance
AFLAS(R) 100/150 Series
AFLAS® 100/150 Series are alternating copolymers of tetrafluoroethylene and propylene. They offer 1) excellent heat resistance, 2) exceptional chemical resistance especially to bases and amines, and 3) high electrical resistivity. AFLAS® 100/150 Series are categorized by ASTM D 1418-01 as class FEPM.

APPLICATIONS

AFLAS® is widely used in various applications such as seals and gaskets, hoses and tubes, electrical insulations, etc. Important industries served include:

1.Automotive
2.Oil and Gas Exploration and Completions
3.Chemical Process Industries
4.Food Processing and Pharmaceutical
5.Wire & Cable


COMPARISON: AFLAS® vs. FKM / FFKM

AFLAS(R)150 vs. FKM AFLAS(R)150 vs. FFKM


IMMERSION TESTING

28% aqueous ammonia for 1000hr at 25:
AFLAS(R) SP FKM dipolymer(bisphenol cure) FKM terpolymer(peroxide cure)
AFLAS® 150P FKM dipolymer
(bisphenol cure)
FKM terpolymer
(peroxide cure)


COMMERCIAL POLYMER TYPES and PHYSICAL PROPERTIES

Grade 100H 100S 150P 150E
Specific Gravity 1.55 1.55 1.55 1.55
Fluorine Content (%) 57 57 57 57
Storage Modulus, G' (RPA 100, 50cpm) 500 340 240 160
Mooney Viscosity (ML1+10, 100) - 160 95 60
Mooney Viscosity (ML1+10, 121) - 115 70 45
Glass Transition Point () -3 -3 -3 -3
Volume Resistivity (omega·cm) 3x1016 3x1016 3x1016 3x1016
Dielectric Breakdown (kV/mm) 25 25 23 23
Appearance Brown Brown Brown Brown
Cure Type Peroxide Cure Peroxide Cure Peroxide Cure Peroxide Cure
Features High Strength High Strength General Extrusion
Tensile Strength (MPa) 21 20 17 13
Tensile Elongation (%) 300 230 280 360
100% Modulus (MPa) 6 7 5 5
Hardness (Shore-A) 72 72 70 70
Compression Set (%, 200, 70hrs) 35 26 29 32
Formulation : Polymer/MT-Carbon/TAIC*/Peroxide**/Sodium Stearate=100/30/5/1/1
* : triallylisocyanurate (100% liquid)  ** : 1,3bis (t-buthylperoxy isopropyl) benzene (100% active)
Cure Condition : Press Cure 170/20min Post Cure 200/4hrs


PACKING

25kg , Box
 AFLAS package AFLAS package


previous
(C)Copyright ASAHI GLASS CO., LTD. 2005-2007. All Rights Reserved.
Privacy Policy